Bushnell Core DS No Glow Wildtierkamera

Bushnell Core DS No Glow Trail Camera

Nachdem ich ein anderes Modell ein paar Monate ausgeliehen und getestet hatte, kaufte ich mir diese Wildtierkamera - und war total enttäuscht. Auf dieser Seite schreibe ich die Gründe dafür auf, die den Leser hoffentlich überzeugen, vom Kauf dieses Modells abzusehen, solange der Hersteller keine Verbesserungen vorgenommen hat.

After I had rented and tested another model for a few months, I bought this wildlife camera - and was totally disappointed. On this page I write down the reasons for this, which hopefully will convince the reader to refrain from buying this model as long as the manufacturer has not made any improvements.

Vor dem Kauf hatte ich mir im Internet diverse Reviews angeschaut und das Produkt mit denen anderer Hersteller verglichen. Die Kamera befindet sich preislich ganz klar im höherwertigen Segment, die Erwartungen sind somit eher hoch. Und sie wurde sehr gut bewertet (zum Beispiel 90 von 100 Punkten auf trailcampro.com). Insbesondere die dank der beiden Sensoren hohe Bildqualität und die Auslösegeschwindigkeit wurden dabei hervorgehoben, zwei sicher sehr wichtige Eigenschaften einer Wildtierkamera:

Before I bought it, I had looked at various reviews on the Internet and compared the product with those of other manufacturers. The price of the camera is clearly in the higher quality segment, so the expectations are rather high. And it was rated very well (for example 90 of 100 points on trailcampro.com). Especially the high image quality and the shutter release speed were emphasized, two certainly very important features of a wildlife camera:

The Bushnell Core Dual Sensor has everything and more that we look for in a low glow trail camera. The DS has nearly perfect speed and detection, really good photos and videos, 12 months of battery life, an internal viewer, and much more. - TCP Staff

Bereits damals fand ich natürlich auch einige negative Stimmen, zum Beispiel bei Amazon. Die waren aber meistens eher mit dem Preis nicht zufrieden oder bemängelten etwas, was mir nicht so wichtig ist.

Already at that time I found of course some negative voices, for example at Amazon. But they were mostly not satisfied with the price or criticized something that is not so important to me.

Zuerst ein paar positive Punkte, denn die gibt es durchaus:

First a few positive points, because there are some:

  • Das Gehäuse macht einen sehr guten Eindruck und hat sich in der Zeit, wo ich diese Kamera nutzte (rund 5 Monate) auch bewährt. Insbesondere schätze ich die Möglichkeit, die Chipkarte auszuwechseln, ohne die Befestigung der Kamera am Baum lösen zu müssen.
  • Der Mechanismus zum Wechseln der Batterien ist ebenfalls gelungen. Zwar schnappt er beim Schliessen nicht immer sofort ein, aber angesichts der Tatsache, dass man die Batterien nur ein-/zweimal pro Jahr wechseln muss, ist das akzeptabel.
  • Das Farbdisplay ermöglicht das Betrachten der Fotos, was recht praktisch ist. Für mich war das kein zwingendes Feature, denn ich habe jeweils meine grosse Kamera dabei, wo ich die Chipkarte einstecke und die Bilder noch komfortabler betrachten kann.
  • Die Tarnung ist nicht zwingend, lässt die Kamera aber noch etwas besser verstecken. Für diejenigen, die darauf verzichten möchten, gibt es das gleiche Modell ohne Tarnung.
  • Mit dem mitgelieferten Gürtel lässt sich die Kamera gut an einem Baum befestigen.
  • Ich hatte mir noch zusätzlich das Python Master Lock (Kabelschloss) gekauft, damit die Kamera auch diebstahlsicher im Wald hängt. Hierbei war ich ein wenig überrascht, dass das Kabelschloss nicht durch die Schleife beim Verschuss des Gehäuses gezogen werden kann. So benötigt man noch ein zusätzliches Vorhängeschloss zum Verschliessen des Gehäuses. Wahrscheinlich ist diese Lösung sicherer, denn der Verschluss des Gehäuses wäre bestimmt eine Sollbruchstelle.
  • The housing makes a very good impression and has proven itself in the time I used this camera (about 5 months). I especially appreciate the possibility to change the smart card without having to loosen the attachment of the camera on the tree.
  • The mechanism for changing the batteries was also well done. Although it does not always snap in immediately when closing. But considering the fact that you only have to change the batteries once or twice a year, this is acceptable.
  • The colour display allows you to view the photos, which is quite practical. For me this was not a mandatory feature, because I always have my big camera with me when I change the smart card and thus can view the pictures even more comfortably.
  • The camouflage is not mandatory, but it allows the camera to be hidden a bit better. For those who want to do without it, there is the same model without camouflage.
  • With the included belt the camera can be easily attached to a tree.
  • I also bought the Python Master Lock (cable lock), so that the camera hangs theft-proof in the forest. Here I was a little bit surprised that the cable lock can't be pulled through the loop where the housing is closed. So you need an additional padlock to lock the housing. Probably this solution is safer, because the lock of the case would be a predetermined breaking point.

Das war es dann leider auch bereits mit den positiven Punkten, obwohl die Kamera noch gar nicht in Betrieb genommen wurde. Im Folgenden beschreibe ich, was nach dem Auspacken passierte: Da die Benutzerführung sehr intuitiv ist, konfigurierte ich nach dem Einsetzen der Batterien und der Chipkarte sofort meine gewünschten Einstellungen. Ich gebe zu: In das Benutzerhandbuch warf ich keinen Blick. Es wird ja auch nicht mitgeliefert. Danach ging es in den Wald und die Kamera blieb gleich ein paar Wochen beim dortigen Biberbau hängen. Folgendes waren meine Einstellungen beim Verlassen des Standorts:

That was it then unfortunately already with the positive points, although the camera was not yet taken at all in operation. In the following I describe what happened after unpacking: As the user guidance is very intuitive, I immediately configured my desired settings after inserting the batteries and the chip card. I admit: I did not take a look into the users manual. After all, it is not included in the delivery. Then I went into the forest and the camera got tied up for a few weeks at the beaver dam there. These were my settings when I left the site:

  • Korrektes Datum und Uhrzeit.
  • Auflösung der Fotos: 8 Megapixel.
  • Anzahl Aufnahmen: 3.
  • Intervall: 5 Sekunden.
  • Zeitstempel und Bushnell-Logo: Off (steht ja in den Exif-Daten).
  • Hybridmodus, damit nicht nur Fotos, sondern auch Videos erstellt werden.
  • Correct date and time.
  • Resolution of the photos: 8 megapixels.
  • Number of photos: 3.
  • Interval: 5 seconds.
  • Timestamp and Bushnell logo: Off (that will be written in the Exif data).
  • Hybrid mode to create not only photos but also videos.

Als ich das nächste Mal zur Kamera ging und die Bilder holte, folgte die grosse Enttäuschung: Zwar waren die Bilder qualitativ sehr gut (siehe unten), viel besser, als ich nach der Erfahrung mit dem anderen Modell erwartet hatte. Aber alles, was ich konfiguriert hatte, war bei den Aufnahmen nicht berücksichtigt worden: Bushnell-Branding auf die Bilder gebrannt (gibt es wirklich jemanden, der diese Standardeinstellung wünscht?), Datum fix auf '01-01-2019 00:00:00' und ins Bild gebrannt, Auflösung nur 3 MP und auch sonst alles falsch. Die Kamera hatte also mit den Standardeinstellungen gearbeitet. Das war der Zeitpunkt, wo ich doch noch das Benutzerhandbuch zur Hand nahm.

The next time I went to the camera to get the pictures, the big disappointment followed: Although the pictures were of very good quality (see below), much better than I expected after the experience with the other model. But everything I had configured had not been taken into account when taking the pictures: Bushnell branding on the pictures (is there really someone who wants this default setting?), date fixed at '01-01-2019 00:00:00' and burned into the picture, resolution only 3 MP and everything else wrong. So the camera had used the default settings. That was the time when I finally took the user manual.

Marder auf durch die Biber gefälltem Baum (mit unerwünschtem Bushnell-Logo und falschen Zeitangaben).

Martens on a tree felled by beavers (with unwanted Bushnell logo and wrong timing).

Im Benutzerhandbuch fand ich heraus, dass die Kamera einige sehr erstaunliche Eigenschaften besitzt:

In the user manual I found out that the camera has some very amazing features:

  • Wenn man den Stromschalter auf OFF stellt ("safe mode"), so wird weiterhin Strom verbraucht. Man könnte also annehmen, dass durch diesen Stromverbrauch die Einstellungen gesichert werden, denn es wird auch geschrieben, dass man beim Verbinden mit einem Computer auf OFF schalten muss. Es wird leider verschwiegen, dass dabei alle Einstellungen verloren gehen. Das passiert ganz schnell, wenn man den dreistufigen Schalter verschiebt, denn er bewegt sich relativ leicht. Das war bei mir aber nicht passiert, eine andere Ursache musste gesucht werden.
  • Auf Seite 9 steht, dass man jede Einstellung mit der ENTER-Taste bestätigen müsse. Auf dem Display steht allerdings, dass man OK drücken müsse. Es gibt eine E-Taste, was ENTER entspricht (Bild auf Seite 6). Am Schluss soll man die MENU-Taste drücken, um das Setup wieder zu verlassen. Dieselbe Taste dient übrigens auch zum Abbrechen während der Einstellung... Ich hatte jede Einstellung bestätigt und das Setup wieder sauber verlassen, auch das konnte also nicht das Problem sein.
  • Nachdem ich weitere Male enttäuscht wurde, habe ich das Verhalten der Kamera mal etwas genauer untersucht und dabei folgendes festgestellt: Wenn die Kamera aktiviert wird, so blinkt eine rote LED, damit man sich entfernen kann. Wenn während dieser Zeit wieder das Setup aktiviert wird, so sind alle Einstellungen noch vorhanden. Sobald allerdings das erste Foto gemacht ist, ist die Kamera zurückgesetzt. Somit würde ich dieses Gerät also total unnutzbar bezeichnen.
  • When the power switch is set to OFF ("safe mode"), power is still consumed. So you could assume that this power consumption saves your settings, because it is also written that you have to switch OFF when connecting to a computer. Unfortunately it is not mentioned that all settings are lost. This happens very quickly if you move the three-position switch, because it moves relatively easily. But this did not happen with me, another cause had to be found.
  • On page 9 it says that you have to confirm every setting with the ENTER button. But the display says that you have to press OK. There is an E button, which corresponds to ENTER (picture on page 6). Finally, press the MENU button to exit the setup. The same button is also used to cancel during the setup... I had confirmed every setting and left the setup properly, so this could not be the problem either.
  • After being disappointed a few more times, I took a closer look at the behaviour of the camera and found the following: When the camera is activated, a red LED flashes, so you can get away. If during this time the setup is activated again, all settings are still there. But as soon as the first photo is taken, the camera is reset. So I would call this device totally useless.

Und ein weiterer Punkt fällt noch sehr negativ auf: Die Bushnell Core DS No Glow Wildtierkamera hat im Namen das "no glow", also den Hinweis auf die Tatsache, dass der Blitz dieser Kamera für Tiere unsichtbar sein soll. Genau das war eines der Entscheidungsmerkmale für den Kauf. Wenn man die Kamera aber nach dem ersten Foto genau betrachtet, so blink während des Intervalls zum nächsten Foto die rote LED. Der Blitz ist also unsichtbar, aber da gibt es eine blinkende Lampe!

And there is another point that stands out very negatively: The Bushnell Core DS No Glow trail camera has the "no glow" in its name, a reference to the fact that the flash of this camera is supposed to be invisible to animals. This was one of the deciding factors for the purchase. But if you look closely at the camera after the first photo, the red LED will flash during the interval to the next photo. So the flash is invisible, but there is a blinking light!

Nach all diesen Feststellungen hatte ich über die Website von Bushnell mit dem Hersteller Kontakt aufgenommen. Dabei schilderte ich die Probleme und fragte, ob es allenfalls ein Software-Update gäbe. Eine Antwort des Kundendienstes (das Wort passt leider nicht so richtig) habe ich auch mehr als einen Monat später nie erhalten. Mein nächster Schritt ist jetzt, das Gerät auf Garantie eintauschen zu lassen. Mal schauen, was das Resultat sein wird. Vielleicht habe ich ja einfach ein Montagsmodell gekauft.

After all these findings I had contacted the manufacturer via the Bushnell website. I described the problems and asked if there maybe was any software update. More than a month later, I never received a reply from the customer service ( sorry, the word does not really fit). My next step now is to have the device exchanged under warranty. Let's see what the result will be. Maybe I just bought a Monday model.